- Release the Water Unit from the cord by untying the knot at the bottom of the unit.
- In order to keep the cord in the same place for the next Spring, tie the cord to a floatation device (a simple empty milk jug with the lid on will work).
- Remove the Water Unit from the water.
- Remove the light from the top of Water Unit by securely holding the base of the unit and pulling the light straight up from the unit.
- To turn the light off, turn the light assembly over and locate the ‘ON|OFF’ label. Take the pin that was included with the unit (or a straightened paper clip) into the small hole below the label and lightly push. You will feel and hear the button click to ‘OFF’.
- To ensure that it is turned off, take the unit into a darkened room or closet and you should see that the unit is not flashing.
- Power washing the base of the unit before storage is recommended but not necessary.
- Contact us at with any questions.